Rear Wheel Drag prickly Skutik

Rear-wheel scooter Drag? Scooter owners may never experienced anything like this. When, for example, try to plug the middle standard and swivel rear wheels, heavy or drag so it should be with more power. Cause, lock nut attached to the canvas clutch coupling bowl. If imposed, the rotation can result in both parts of the so-wear. "There should be a clearance between the nut and bowl coupling so that the bowl can rotate freely and can be locked with the development of new canvas clutch. Not a locking bolt," said Slamet, an instructor at PT Yamaha Motor Kencana Indonesia (YMKI). If the lock nut is not tight, the nut can be shifted towards the opening (at the nut end position that there is a bowl clutch). If sticking to hard, feared even make the wheels so jammed. Trouble shooting other concerned canvas clutch is rapidly depleted due to the amount of power than the standard. Such conditions occur in the motor which has experienced extreme bore-up. Much needed extra strong canvas clutch. Endless canvas clutch variety. Not only the thickness of the benchmark, but the length of the standard size can make clutch performance was not perfect. Signs of wear of canvass among others slip as no longer perfect canvas clutch lock bowl. That is, it takes a higher engine speed to be able to turn the wheels. Signs clutch wear, in addition to skid, the motor speed halting like letikan spark plug in the combustion chamber is in a condition of life and death. More severe if conditions clutch bowl itself also has Peang. To fix this, clutch lining must be replaced one set consists of three pieces. The price of the fruit around Rp 65,000. When buying a canvass not following her home because benderolnya quite surprising. When buying a canvass in ketengan, check the condition per shoe, lest the already weak so it is easy to connect to the rear wheels. The new standard clutch shoe is connected to the rear wheels at 2,000 rpm. If per sluggish, yet the engine rev up that much, shoe clutch is connected to the rear wheels. That is, not until 2,000 rpm, the rear wheels have been spinning first. When you replace the per tougher, it is too late to make the rear wheels spinning. If you want a more responsive rear wheel spins at 1750 rpm, please replace per coupling with softer.